Email: Sales@M-and-D.com
Toll Free 866-914-1252
Toll Free FAX: 877-571-4602
Mon-Fri 9am-5pm
Sat 10am-2pm
 lawnmower parts
25405 Broadway Ave., Unit 4, Oakwood Village, OH 44146
lawnmower repair
clear
home sep Log In sep Your Cart sep Check Out sep About Us sep     More Search Options
clear

EXMARK Parts

Showing 1-50 of 110 matching items
Part#   Description Price Buy
 
ST-280-874 image
enlarge 		EXMARK/1-613098 - Stens 280874
Flat Idler. Replaces OEM: EXMARK 1-613098, HUSTLER 781856 Fits Models: EXMARK 44", 48" and 52" Lazer Z HP48" and 52" Turf Tracer hydro floating deck Specs: A: 5 1/2" , B: 4 7/8" , C: 21/32" , E: 1/4" , F: 1/4" , K: 1" , T: 0.06" , V: 1 11/32"		 $19.06
ST-160-168 image
enlarge 		11-4.00-5 TURF SAVER 2 PLY - Stens 160168
Cheng Shin Tire. Replaces OEM: EXMARK 1-513032 Specs: Type: Tubeless, Tread: Turf Saver, Tire Size: 11-400-5, PLY: 2, Broad Shoulder Design Provides Excellent Tractionon turf with minimal turf wear		 $18.42
ST-160-303 13-5.00-6 SMOOTH 4 PLY - Stens 160303
Cheng Shin Tire. Replaces OEM: EXMARK 1-633002 Specs: Type: Tubeless, Tread: Smooth, Tire Size: 13-500-6, PLY: 4, Provides Wide Surface Weight Distribution For Increased steering and traction		 $39.52
ST-255-383 EXMARK/1-611223 - Stens 255383
Electric Pto Clutch. Replaces OEM: EXMARK 1-611223, EXMARK 603539, SIMPLICITY 21823, WARNER 5215-13 Fits Models: EXMARK Turf Tracer Hydro, SIMPLICITY HW1436 Pacer hydro walk behind with 36" deck;for 21 HP engines Specs: ID: 1" , Height: 3 1/2" , Diameter Pulley: 6" , Direction: Clockwise, Uses belt width: 1/2" OR 5/8"		 $288.36
Your Price: $273.94
ST-302-696 EXMARK/1-613112 - Stens 302696
Blade, Raptor Mulching. Replaces OEM: EXMARK 1-613112, EXMARK 103-0301 Specs: Length: 20 7/16" , Width: 2 1/2" , Center Hole: 5/8", Thickness: 0.25" , Formed Requires 3 For 60" Cut		 $19.64
ST-255-559 image
enlarge 		EXMARK/109-2916 - Stens 255559
Electric Pto Clutch. Replaces OEM: EXMARK 1-65304, EXMARK 1-653048, EXMARK 1-653292, EXMARK 103-0690, EXMARK 109-2916, WARNER I-5218-80-C, WARNER 5218-80 Fits Models: EXMARK Lazer Z serial No. 260,000 and higher Specs: ID: 1" , Height: 3 1/4" , Diameter Pulley: 7 3/8" , Direction: Counter Clockwise, Uses belt width: 5/8"		 $321.52
Your Price: $305.44
ST-430-334 image
enlarge 		EXMARK/109-4736 - Stens 430334
Starter Switch. Replaces OEM: EXMARK 103-0206, EXMARK 104-2541, EXMARK 109-4736, EXMARK 88-9830, TORO 103-0206, TORO 104-2541, TORO 88-9830 Fits Models: EXMARK Lazer Z and 60" and 72" Lazer Z XP Specs: No. Of Positions: 3, No. Of Terminals: 6, 5/8" Mounting Stem		 $16.24
ST-285-208 image
enlarge 		EXMARK/103-0584 - Stens 285208
Spindle Shaft. Replaces OEM: EXMARK 103-0584 Fits Models: EXMARK Lazer Z and Lazer XP 52", 60" and 72" cut decks, serial number 260,000 and higher Specs: Length: 7 1/4" , OD: 1 3/4" , Thread Size: 5/8" -18, Shaft Only Nut Not Included		 $44.85
ST-255-399 EXMARK/103-0661 - Stens 255399
Electric Pto Clutch. Replaces OEM: EXMARK 1-631644, EXMARK 103-0661, WARNER 5218-25 Fits Models: EXMARK Lazer Z Specs: ID: 1 1/8" , Height: 3 5/16" , Diameter Pulley: 6 5/16" , Direction: Clockwise, Uses belt width: 5/8"		 $338.16
Your Price: $321.25
ST-255-555 image
enlarge 		EXMARK/103-0662 - Stens 255555
Electric Pto Clutch. Replaces OEM: EXMARK 103-0661, EXMARK 103-0662, SCAG 461397, WARNER I 5218-76 C, WARNER 5218-76 Fits Models: EXMARK Lazer Z below serial No. 159,999, for 18 and22 HP engines Specs: ID: 1" , Height: 3 3/8" , Diameter Pulley: 6 5/16" , Direction: Clockwise, Uses belt width: 5/8" , Does Not Include Hardware		 $353.67
Your Price: $335.99
ST-255-527 EXMARK/103-0665 - Stens 255527
Electric Pto Clutch. Replaces OEM: EXMARK 1-631732, EXMARK 1-641300, EXMARK 103-0665, EXMARK 631732, EXMARK 641300, FERRIS 1521145, OGURA GT2.5-MC04, OGURA MA-GTEXM14, SCAG 461395, SCAG 461716, SCAG 481530 Fits Models: EXMARK Lazer Z Specs: ID: 1 1/8" , Height: 2 3/4" , Diameter Pulley: 6"		 $394.08
Your Price: $374.38
ST-285-206 image
enlarge 		EXMARK/103-0958 - Stens 285206
Spindle Shaft. Replaces OEM: EXMARK 103-0958 Fits Models: EXMARK Turf Tracer and Turf Ranger 52" cut decks, serial number 260,000 thru 300,000 Specs: Length: 6 3/4" , OD: 1 3/4" , Thread Size: 5/8" -18, Outer Short Shaft		 $66.55
ST-285-222 image
enlarge 		EXMARK/103-0957 - Stens 285222
Spindle Shaft. Replaces OEM: EXMARK 103-0957 Fits Models: EXMARK Lazer HP, 44", 48" and 52" cut decks, serialnumbers 260,000-369,000 Specs: Length: 7 1/4" , OD: 1 3/4" , Thread Size: 5/8" -18		 $65.59
ST-285-219 image
enlarge 		EXMARK/103-0959 - Stens 285219
Spindle Shaft. Replaces OEM: EXMARK 103-0959 Fits Models: EXMARK Turf Tracer and Turf Ranger 52" and 60" cut decks serial number 260,000 and higher Specs: Length: 8 5/8" , OD: 1 3/4" , Thread Size: 5/8" -18, Center Shaft		 $71.11
ST-265-834 image
enlarge 		EXMARK/1-413308 - Stens 265834
Oem Spec Belt. Replaces OEM: EXMARK 1-413308, EXMARK 413308 Fits Models: EXMARK Turf Tracer HP, 52" decks and Lazer HP 48" cut decks Specs: Application: Deck, Length: 143 1/8" , Width: 5/8" , Type: Covered		 $61.48
ST-355-022 EXMARK/1-303495 - Stens 355022
Blade, Mulching. Replaces OEM: EXMARK 1-303495, EXMARK 1-633484, EXMARK 103-2518, EXMARK 103-6582 Fits Models: EXMARK Viking, Metro Specs: Length: 18" , Width: 2 1/2" , Thickness: 0.164" , Formed		 $17.19
ST-265-482 image
enlarge 		EXMARK/1-323280 - Stens 265482
Oem Spec Belt. Replaces OEM: EXMARK 1-323280, SNAPPER 1-7334, SNAPPER 7017334 Fits Models: EXMARK Metro 36" and 48" cut decks Specs: Application: Transmission, Length: 39 1/2" , Width: 1/2" , Type: Raw Edge		 $15.92
ST-285-199 image
enlarge 		EXMARK/32120-8 - Stens 285199
Retaining Ring. Replaces OEM: EXMARK 1-808502, EXMARK 32120-8 Fits Models: EXMARK Lazer, Turf Ranger and Turf Tracer HP series44", 48", 52", 60" and 72" cut decks Specs: ID: 1" , OD: 2 1/4" , .066 Thk		 $2.86
ST-285-258 image
enlarge 		EXMARK/322172 - Stens 285258
Pulley With Brake Drum. Replaces OEM: EXMARK 1-322172 Fits Models: EXMARK Newer double groove belt drive Specs: ID: 2 1/4" , OD: 8" , Made By An Oem Supplier		 $35.52
ST-355-079 EXMARK/103-6582 - Stens 355079
Blade, Mulching. Replaces OEM: EXMARK 1-633484, EXMARK 103-2518, EXMARK 103-6582 Fits Models: EXMARK 52" deck on Lazer Z Specs: Length: 17 15/16" , Width: 2 1/2" , Thickness: 0.204" , Formed		 $13.73
ST-355-121 EXMARK/103-6581 - Stens 355121
Blade, Mulching. Replaces OEM: EXMARK 1-403148, EXMARK 103-2517, EXMARK 103-6581 Fits Models: EXMARK 3 blades for a 48" cut Specs: Length: 16 1/4" , Width: 2 1/2" , Thickness: 0.204" , Formed Requires 3 For 48" Cut		 $16.20
ST-355-275 EXMARK/103-6392 - Stens 355275
Blade, Mulching. Replaces OEM: EXMARK 103-6392 Fits Models: EXMARK 52" deck Lazer Z for serial numbers 540,000 and higher; Viking and Metro Specs: Length: 18" , Width: 2 1/2" , Thickness: 0.204" , Formed Requires 2 For 36" And 3 For 52" Cut		 $13.80
ST-265-191 image
enlarge 		EXMARK/103-5589 - Stens 265191
Oem Spec Belt. Replaces OEM: EXMARK 1-653416, EXMARK 103-5589, EXMARK 653416 Fits Models: EXMARK 52" cut decks Specs: Application: Pump Drive, Length: 50 1/2" , Width: 1/2" , Type: Covered		 $15.40
ST-258-111 5/8 X 111 - Stens 258111
True-blue Belt. Replaces OEM: EXMARK 1-633173 Specs: 111" L x , 5/8" W		 $49.93
ST-303-196 24 1/2" ROLLED AIR LIFT - Stens 303196
Platinum Blade. Replaces OEM: EXMARK 1-643097, EXMARK 103-2521, GRAVELY 047685, GRAVELY 08898800, GRAVELY 08983851, GRAVELY 09290500, SCAG 48112, SCAG 481709 Specs: Length: 24 1/2" , Width: 2 1/2" , Thickness: 0.204" , Straight Requires 3 For A 72" Cut		 $18.54
ST-303-132 24 1/2" TOOTHED - Stens 303132
Platinum Blade. Replaces OEM: EXMARK 1-643097, EXMARK 103-2521, GRAVELY 047685, GRAVELY 08898800, GRAVELY 08983800, GRAVELY 08983851, GRAVELY 09290500, GRAVELY 09290600, SCAG 48112, SCAG 481709 Specs: Length: 24 1/2" , Width: 2 1/2" , Thickness: 0.204" , Formed Requires 3 For 72" Cut		 $20.92
ST-280-709 image
enlarge 		EXMARK/1-323285 - Stens 280709
Heavy Duty Flat Idler. Replaces OEM: EXMARK 1-323285, EXMARK 323285, KEES 639-19087 Fits Models: EXMARK 26", 48" and 52" metro walk behinds Specs: A: 3 1/4" , B: 2 3/4" , C: 3/8" , E: 3/4" , F: 9/32" , H: 15/32" , K: 7/8" , T: 0.05" , V: 1 3/16" , *idlers Have A Double Row Of Bearings With Doublesealed sides *for heavier load applications *used By Oem's		 $17.00
ST-265-458 image
enlarge 		EXMARK/1-323288 - Stens 265458
Oem Spec Belt. Replaces OEM: EXMARK 1-323288 Fits Models: EXMARK Metro 36" and 48" cut decks Specs: Application: Dual Wheel Drive, Length: 49 3/4" , Width: 1 1/8" , Type: Banded		 $46.15
ST-265-079 image
enlarge 		EXMARK/1-323735 - Stens 265079
Oem Spec Belt. Replaces OEM: EXMARK 1-323735, EXMARK 323735 Fits Models: EXMARK Viking 36" cut decks Specs: Application: Deck, Length: 83 1/2" , Width: 19/32" , Type: Covered		 $29.92
ST-265-486 image
enlarge 		EXMARK/1-323299 - Stens 265486
Oem Spec Belt. Replaces OEM: EXMARK 1-323299 Fits Models: EXMARK Metro 36" and 48" cut decks non-hydro Specs: Application: Blade Drive, Length: 82 3/4" , Width: 5/8" , Type: Raw Edge		 $29.63
ST-275-883 image
enlarge 		EXMARK/303073 - Stens 275883
Cast Iron Pulley. Replaces OEM: EXMARK 1-303073, HUSQVARNA 539 97 63-98, KEES 362095, KEES 976398, LESCO 050186, LESCO 050307, SNAPPER 7-6398, SNAPPER 7076398 Fits Models: EXMARK 32". 36" and 48" cut mowers, KEES 32". 36" and 48" cut mowers, SNAPPER 32". 36" and 48" cut mowers Specs: OD: 5 5/8" , Bore: 1" , Keyway: 1/4" , A/b Belt Type Offset Hub Two 5/16"-18 Set Screws		 $36.50
ST-265-134 image
enlarge 		EXMARK/1-633127 - Stens 265134
Oem Spec Belt. Replaces OEM: EXMARK 1-633127, EXMARK 633127 Fits Models: EXMARK Lazer Z 60" cut decks Specs: Application: Blade Drive, Length: 146" , Width: 5/8" , Type: Raw Edge		 $52.50
ST-280-862 image
enlarge 		EXMARK/1-633109 - Stens 280862
Flat Idler. Replaces OEM: EXMARK 1-633109, EXMARK 633109 Fits Models: EXMARK Lazer Z and Lazer XP 60" and 72" cut decks Specs: A: 6 3/4" , B: 5 7/8" , C: 11/16" , E: 7/32" , F: 7/32" , K: 3/4" , T: 0.191" , V: 1 1/8"		 $21.04
ST-355-105 EXMARK/1-613112 - Stens 355105
Blade, Mulching. Replaces OEM: EXMARK 1-613112 Fits Models: EXMARK 60" deck on Lazer Z Specs: Length: 20 7/16" , Width: 2 1/2" , Thickness: 0.204" , Formed		 $14.36
ST-285-203 image
enlarge 		EXMARK/1-323533 - Stens 285203
Spindle Bearing Spacer. Replaces OEM: EXMARK 1-323533 Fits Models: EXMARK Lazer, Turf Ranger, Turf Tracer and Turf Tracer HP series 44", 48", 52", 60" and 72" cut decks Specs: ID: 1" , OD: 1 1/2" , 1/4" Thk		 $2.71
ST-285-218 image
enlarge 		EXMARK/1-323532 - Stens 285218
Spindle Housing Only. Replaces OEM: EXMARK 1-323532, EXMARK 103-2547 Fits Models: EXMARK Lazer Z HP with serial number 160,000 thru 369,000; 44", 48" and 52" cut decks Specs: ID: 1" , OD: 5 1/4" , Height: 3 3/4" , With Grease Fitting Has No Lip		 $89.10
ST-285-020 image
enlarge 		EXMARK/1-323385 - Stens 285020
Belt Cover Knob. Replaces OEM: EXMARK 1-323385, HUSTLER 075291 Fits Models: EXMARK Lazer Z and Viking 36", 48" and 52" cut decks Specs: Length: 1 1/8" , Thread Size: 5/16" -18, 6 Knobs Per Unit		 $3.92
ST-265-492 image
enlarge 		EXMARK/1-323300 - Stens 265492
Oem Spec Belt. Replaces OEM: EXMARK 1-323300, EXMARK 1-543224, EXMARK 323300, EXMARK 543224 Fits Models: EXMARK Metro 48" cut decks Specs: Application: Blade, Length: 88" , Width: 5/8" , Type: Raw Edge		 $39.17
ST-355-213 EXMARK/103-9631 - Stens 355213
Blade, Mulching. Replaces OEM: EXMARK 103-9631 Fits Models: EXMARK Lazer Z 72" Triton Deck; Requires 3 blades for a 72" cut Specs: Length: 24 5/8" , Width: 3" , Thickness: 0.204" , Straight		 $21.50
ST-225-205 image
enlarge 		EXMARK/603602 - Stens 225205
Roller Bushing. Replaces OEM: EXMARK 1-603602, EXMARK 103-5364 Fits Models: EXMARK 52", 60" and 72" cut decks and scalp rollers Used By: Fits our 210-165 Plastic Deck Wheel Specs: ID: 3/8" , OD: 5/8" , Height: 2 9/16" , Anti-scalp Roller RelatedItems: ST-210-165, Plastic Deck Wheel, EXMARK/1-603299		 $8.18
ST-265-842 image
enlarge 		EXMARK/1-413096 - Stens 265842
Oem Spec Belt. Replaces OEM: EXMARK 1-413096, EXMARK 413096 Fits Models: EXMARK TTHP Turf Tracer Specs: Application: Deck, Length: 36" , Width: 5/8" , Type: Covered		 $19.17
ST-280-886 image
enlarge 		EXMARK/1-413099 - Stens 280886
Flat Idler. Replaces OEM: EXMARK 1-413099 Fits Models: EXMARK Lazer Z HP 44", 48" and 52" cut decks, MetroHP 36", 48" and 52" cut decks, Turf Tracer HP36", 48" and 52" cut decks and Turf Ranger Specs: A: 5 3/4" , B: 5" , C: 5/8" , E: 1/4" , F: 1/4" , K: 2" , T: 0.075" , V: 2 13/32"		 $22.87
ST-255-459 image
enlarge 		EXMARK/103-6579 - Stens 255459
Electric Pto Clutch. Replaces OEM: EXMARK 103-6579, WARNER 5218-99 Fits Models: EXMARK Lazer HP; for 27 HP Kohler engines Specs: ID: 1 1/8" , Height: 3 5/16" , Diameter Pulley: 7 11/32" , Direction: Clockwise, Uses belt width: 5/8"		 $355.15
Your Price: $337.39
ST-355-279 EXMARK/103-6394 - Stens 355279
Blade, Mulching. Replaces OEM: EXMARK 103-6394 Fits Models: EXMARK 72" deck Lazer Z for serial numbers 540,000 and higher Specs: Length: 24 1/2" , Width: 3" , Thickness: 0.204" , Formed		 $17.24
ST-355-229 EXMARK/103-6401 - Stens 355229
Blade. Replaces OEM: EXMARK 103-6401 Fits Models: EXMARK Metro and Turf Tracer; Serial number 510,000and higher; 48" cut Specs: Length: 16 1/4" , Width: 2 1/2" , Thickness: 0.212" , Straight		 $13.52
ST-355-291 EXMARK/103-6402 - Stens 355291
Blade. Replaces OEM: EXMARK 103-6402 Fits Models: EXMARK 52" deck Lazer Z for serial numbers 540,000 and higher Specs: Length: 18" , Width: 2 1/2" , Thickness: 0.204" , Straight		 $13.69
ST-265-829 image
enlarge 		EXMARK/1-603306 - Stens 265829
Oem Spec Belt. Replaces OEM: EXMARK 1-603306, EXMARK 603306 Fits Models: EXMARK Turf Tracer serial #8400 and higher, 52" and60" cut decks Specs: Application: Drive, Length: 81 1/8" , Width: 5/8" , Type: Covered		 $30.88
ST-230-241 image
enlarge 		EXMARK/513009 - Stens 230241
Wheel Bearing. Replaces OEM: EXMARK 1-513009, EXMARK 1-631560 Fits Models: EXMARK Explorer and Lazer Z Specs: 0.508" , 1.374" , Height: 0.54" , 1.500" Od Flange		 $19.71
ST-240-888 image
enlarge 		EXMARK/481581 - Stens 240888
Coupler. Replaces OEM: EXMARK 1-323501, EXMARK 1-324340, SCAG 481581 Fits Models: EXMARK 5-speed transmissions with 9 spline outputshaft, SCAG 5-speed transmissions with 9 spline outputshaft Specs: ID: 5/8" , OD: 1 3/16" , Height: 2" , 9 Tooth Spline Includes Grease Zerk		 $23.75
ST-241-008 image
enlarge 		GRAVELY/04901000 - Stens 241008
Transmission. Replaces OEM: EXMARK 1-323500, GRAVELY 04901000, TECUMSEH 700-079, TECUMSEH 794816 Fits Models: EXMARK 5-speed walk behinds with 9 spline transmissions, GRAVELY 5-speed walk behinds with 9 spline transmissions, TECUMSEH 5-speed walk behinds with 9 spline transmissions		 $381.80
Your Price: $362.71

Showing 1-50 of 110 matching items.
Click below to see more...
1 2 3 Next Last


Product Index
Customer Service
New to Repair?
FREE Tech Support
Parts Diagrams
Appliance Parts
Vacuum Cleaner Parts
Can't find it ?
Manuals,Videos,CDs
Small Engine Tools
Engines,Shortblocks
In-store specials
Clearance Items
Brands list
Genuine OEM Parts
AYP/Sears Parts
Briggs and Stratton Parts
Briggs/Generac Parts
Bunton Parts
Dana/Foote/Spicer Parts
Freeplay goods
Great Dane Parts
Honda Parts
Hydro-Gear® Parts
Karcher Parts
Kawasaki Engine Parts
Kohler Engine Parts
Meyer Plow Parts
MTD Parts
Murray Parts
Onan Parts
Poulan/Weedetaer Parts
Ridgid Tool Parts
Ryobi Tool Parts
Small Engines
Tanaka Parts
Tecumseh/Peerless Parts
Tillotson Parts
Toro Parts
Generator Parts
Tractor Parts
Walbro Parts
Zama carbs & parts
Aftermarket Parts
Air Filters
ATV Parts
Bearings & Bushings
Belts
Blades
Carb Parts & Kits
Chainsaw/Cutoff Parts
Commercial/Turf
Electrical Parts
Fuel System Parts
Fuel/Oil/Trans Filters
Gas Cans & Lubricants
Hardware Assortments
Ignition Parts
Import/Clone Parts 6.5HP
Aftermarket Honda® Parts
Import/Clone Parts 9HP
Aftermarket Honda® Parts
Import/Clone Parts 13HP
Aftermarket Honda® Parts
Internal Parts & Gaskets
Kerosene Heater Parts
MiniBike/GoKart Parts
Mower & Drive Parts
Mufflers
Pressure Washer Parts
Pulleys/Idlers
Safety Gear
Snowblower Parts
Sparkplugs
Starters & Parts
Throtle Parts
Tiller Parts
Tires, Wheels Etc
Trimmer Parts

All pages © 1997-2008 M-and-D.com