Item# ST-030-011
Gas Flanged Pump, General Pump TX1508G8UI UPC: 23899234264
Gas Flanged Pump / General Pump TX1508G8UI Replaces General Pump TX1508G8UI Fits NHC 285-0011 Built-in unloader and downstream injector on left side of manifold, Manufacturer warranty applies, Type: Horizontal Gas Flanged, Stroke: .315", Bore: .591 ", RPM: 3,400, GHP: 9.2, Large, lightweight connecting rods, New long life low and high pressure seals and forged brass manifold with exclusive lifetime warranty, Maximum fluid temperature: 165° F, Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F, Maximum inlet pressure: 125 PSI, TX Series 63, Triplex plunger pump, SAE J609B, Gallons Per Minute: 3.0, Flanged for direct couple to gasoline engines; 1" hollow shaftn unloader and downstream injector on left side of manifold, Maximum inlet required, flooded, Crankcase oil capacity 14 oz., Made By: An OEM supplier
|
|
|
Qty to buy:
|
|
|
|