|
Item# ST-030-015
GENERAL PUMP/TX1510G8UI
Stens Part 030015 - Gas Flanged Pump. Replaces OEM: GENERAL PUMP, TX1510G8UI Specs: Type:Gas Flanged, Bore:0.591 ", Stroke:0.394 ", Gallons Per Minute:4.0, Pounds Per Square Inch:3,000, RPM:3,400, GHP:12.3, TX Series 63, Triplex plunger pump, Built-in unloader and downstream injector on leftside of manifold 1" hollow shaft , Flanged for direct couple to gasoline engines, SAE J609B, Large, lightweight connecting rods, New long life low and high pressure seals, Forged brass manifold with exclusive lifetime warranty Maximum inlet pressure 125 PSI , Maximum fluid temperature 165-¦ F., Inlet port thread 1/2"-14 BSP-F, Discharge port thread 3/8"-19 BSP-F, Pump dimensions 8.4" x 8.3" x 4.8", Maximum inlet required, flooded, Crankcase oil capacity 14 oz.
|
| |
|
|
Quantity:
|
|
|
