ROTARY
|
RO-14887
 
enlarge
$13.30
|
Rotary Part number 14887
SAFETY GLASSES - SB4575D UPC: 034761148879
|
|
RO-14421
 
enlarge
$803.28
|
Rotary Part number 14421
SUPER JOLLY GRINDER TL1150 UPC: 034761144215
|
|
Stens
|
ST-051-250
 
enlarge
$586.45
|
Bull Rider Sulky, TrimmerTrap DM-1 UPC: 23899306275
Bull Rider Sulky / TrimmerTrap DM-1 Replaces Trimmer Trap DM-1 Built-in roll limiter allows sulky to follow ground contours during normal mowing operations, yet prevents foot platform from rolling over, Solid steel coupler connects foot platform and connecting arm, Removal of quick pin disconnects foot platform from connecting arm, Casters turn on extra heavy-duty 7/8" thrust bearings which dramatically reduce friction, assuring years of smooth operation, Strong and durable with single piece wheels with centered hubs, which are welded to the wheel on both sides, Does include mounting hardware, Special order item. Please allow additional time for delivery. No cancellations. No returns., Heavy-duty mounting bracket bolts quickly and easily to mower, Manufacturer warranty applies
|
|
ST-030-311
 
enlarge
$389.62
|
Gas Flanged Pump, Comet 6525.1005.00 UPC: 23899312221
Gas Flanged Pump / Comet 6525.1005.00 Replaces Comet Pump 6525.0005.00, Comet Pump 6525.1005.00 Fits Stens 030-043 GHP: 7.7, Bore: .591 ", Shaft diameter 3/4", Type: Hotizontal Gas Flanged, One oil cap for travel and operation, Manufacturer warranty applies, Pump is shipped with oil from manufacturer, Inlet port thread: 1/2" FPT and Discharge port thread: 3/8" MPT, Maximum fluid temperature: 145°F, Quick mount flange, Stainless steel plungers, Steel shaft with built-in key, Stainless steel check valves, Forged brass manifold and Patent registered ball bearing design, Gallons Per Minute: 2.8, Stroke: .254", Made By: An OEM supplier, Built-in easy start, uniflow unloader and chemical injector, RPM: 3,400, Capacity of 4.5 oz pump oil, 1/2" FGH Inlet - 3/8" MPT Outlet, Maximum inlet pressure: 120 PSI
|
|
ST-051-114
$92.13
|
Floor Jack, 2 Ton Floor Jack F2332 UPC: 23899340538
Floor Jack / 2 Ton Floor Jack F2332 Replaces Pro-Lift F2332 Swivel saddle and swivel rear casters provide easy positioning and safety, Packaging Type: OEM package, Built-in safety valve provides overload protection, Heavy duty steel construction provides long term durability, Patented by-pass device protects against over pumping for safe operation, 051-118 Wheel Chocks and 051-116 2 Ton Jack Stands recommended for use with Floor Jack, 5 1/4" - 13" lifting range, Length: 18 ", Blow molded carrying case for easy transport and storage, Meets or exceeds ANSI/PALD requirements
|
|
ST-030-015
 
enlarge
$719.08
|
Gas Flanged Pump, General Pump TX1510G8UI UPC: 23899234240
Gas Flanged Pump / General Pump TX1510G8UI Replaces General Pump TX1510G8UI Manufacturer warranty applies, Flanged for direct couple to gasoline engines; 1" hollow shaft, Bore: .591 ", Stroke: .394", Crankcase oil capacity 14 oz., Maximum inlet required, flooded, TX Series 63, Triplex plunger pump, SAE J609B, Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F, Built-in unloader and downstream injector on left side of manifold, Made By: An OEM supplier, Gallons Per Minute: 4.0, Maximum fluid temperature: 165° F., Type: Horizontal Gas Flanged, RPM: 3,400, Large, lightweight connecting rods, New long life low and high pressure seals and Forged brass manifold with exclusive lifetime warranty, GHP: 12.3, Maximum inlet pressure: 125 PSI
|
|
ST-030-011
 
enlarge
$719.08
|
Gas Flanged Pump, General Pump TX1508G8UI UPC: 23899234264
Gas Flanged Pump / General Pump TX1508G8UI Replaces General Pump TX1508G8UI Fits NHC 285-0011 Built-in unloader and downstream injector on left side of manifold, Manufacturer warranty applies, Type: Horizontal Gas Flanged, Stroke: .315", Bore: .591 ", RPM: 3,400, GHP: 9.2, Large, lightweight connecting rods, New long life low and high pressure seals and forged brass manifold with exclusive lifetime warranty, Maximum fluid temperature: 165° F, Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F, Maximum inlet pressure: 125 PSI, TX Series 63, Triplex plunger pump, SAE J609B, Gallons Per Minute: 3.0, Flanged for direct couple to gasoline engines; 1" hollow shaftn unloader and downstream injector on left side of manifold, Maximum inlet required, flooded, Crankcase oil capacity 14 oz., Made By: An OEM supplier
|
|
ST-030-007
 
enlarge
$684.03
|
Gas Flanged Pump, General Pump TC1506GUI UPC: 23899305162
Gas Flanged Pump / General Pump TC1506GUI Replaces General Pump TC1506GUI TC Series 60, Triplex plunger pump, SAE J609A, Crankcase oil capacity 11.8 oz., Gallons Per Minute: 2.6, Bore: .591 ", Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F, Flanged for direct couple to gasoline engines; 3/4" hollow shaft, Flooded pump dimesions 10.4" x 8" x 7.7", Type: Horizontal Gas Flanged, Maximum fluid temperature: 165° F, Manufacturer warranty applies, RPM: 3,400, Gauge port 1/8" maximum inlet required, Premium built-in trapped pressure unloader on left side of manifold with an exclusive lifetime warranty, Made By: An OEM supplier, Stroke: .256", Maximum inlet pressure: 125 PSI, GHP: 7.21
|
|
ST-030-303
 
enlarge
$389.62
|
Gas Flanged Pump, Comet 6525.0001.00 UPC: 23899234219
Gas Flanged Pump / Comet 6525.0001.00 Replaces Comet Pump 6525.0001.00 Fits Stens 030-039 Manufacturer warranty applies, Pump is shipped with oil from manufacturer, RPM: 3,400, Maximum fluid temperature: 145°F, Type: Hotizontal Gas Flanged, Bore: .591 ", Gallons Per Minute: 2.2, Capacity of 4.5 oz pump oil, 1/2" FGH Inlet - 3/8" MPT Outlet, Steel shaft with built-in key, Quick mount flange, Stainless steel plungers and check valves, Forged brass manifold and Patent registered ball bearing design, Stroke: .218", Maximum inlet pressure: 120 PSI, Made By: An OEM supplier, Inlet port thread: 1/2" FPT and Discharge port thread: 3/8" MPT, One oil cap for travel and operation, GHP: 6.4, Shaft diameter: 3/4", Built-in easy start with uniflow unloader and chemical injector
|
|
ST-051-255
 
enlarge
$621.64
|
Bronco Rider Sulky, TrimmerTrap SM-1 UPC: 23899306206
Bronco Rider Sulky / TrimmerTrap SM-1 Replaces Trimmer Trap SM-1 Large diameter 4-ply tires practically ends flats and other tire problems, Heavy-duty mounting bracket bolts quickly and easily to mower, Offset hubs give you a choice of track widths by reversing the wheels, Unique design places the main frame of the sulky over 4 inches above ground, Does include mounting hardware, Removal of quick pin disconnects foot platform from connecting arm, Built-in "yaw limiter" allows foot platform to pivot up to 65 degrees enabling zero turns, yet preventing dangerous jackknifing, 7/8" axles pass through box tube frame and are located close to junction for strength and rigidity, Unique design allows replacement of foot platform, Manufacturer warranty applies
|
|
ROTARY
|
RO-14880
 
enlarge
$17.73
|
Rotary Part number 14880
SAFETY GLASSES - SCM6318STP UPC: 034761148800
|
|
RO-14901
 
enlarge
$11.30
|
Rotary Part number 14901
SAFETY GLASSES - SB3345E UPC: 034761149012
|
|
RO-14882
 
enlarge
$10.44
|
Rotary Part number 14882
SAFETY GLASSES - SB6320SP UPC: 034761148824
|
|
Stens
|
ST-255-091
 
enlarge
$169.13
|
Pulley Clutch, 1" Bore UPC: 23899018796
Pulley Clutch / 1" Bore Replaces Hoffco/Comet 202312A Fits Rotary 8710, Oregon 84-020, Ratio Parts 800-024 Belt: A or B, Bore: 1 ", Non-directional clutch (inboard or outboard), For 2.5 thru 8 HP engines, Keyway: 1/4 ", One-piece sintered metal shoes, Keyway: Built-in, 3" pulley diameter
|
|
ST-255-059
 
enlarge
$191.16
|
Sprocket Clutch, 1" Bore UPC: 23899515127
Sprocket Clutch / 1" Bore Replaces Hoffco/Comet 206170A-6 Fits Rotary 8709, Oregon 84-022 Keyway: Built-in, 4" OD, Keyway: 1/4 ", Non-directional clutch (inboard or outboard), Bore: 1, Fits 2.5 thru 8 HP engines, One-piece sintered metal shoes, Outboard mounting only (sprocket away from engine), Chain Number: 41, Teeth: 10
|
|
ST-255-042
 
enlarge
$92.12
|
Sprocket Clutch, 3/4" Bore, 10 Teeth, 40/41 Chain UPC: 23899515035
Sprocket Clutch / 3/4" Bore, 10 Teeth, 40/41 Chain Replaces Hoffco/Comet 209768 Fits Martin Wheel MT12-10RC41, Prime Line 7-06003, NHC 283-4355, Napa 7-06003 Bore: 3/4, Keyway: Built-in, One-piece sintered metal shoes, Non-directional clutch (inboard or outboard), 4" OD, Keyway: 3/16 ", For 2.5 thru 8 HP engines, Teeth: 10, Chain Number: 40/41
|
|
ST-255-026
 
enlarge
$195.52
|
Sprocket Clutch, 1" Bore UPC: 23899018697
Sprocket Clutch / 1" Bore Replaces Hoffco/Comet 206169A-6 Fits Rotary 8708, Oregon 84-024 Teeth: 12, Non-directional clutch (inboard or outboard), One-piece sintered metal shoes, Bore: 1, Keyway: Built-in, For 2.5 thru 8 HP, 4" OD, Outboard mounting only (sprocket away from engine), Keyway: 1/4 ", Chain Number: 35
|
|
ST-255-018
 
enlarge
$94.53
|
Sprocket Clutch, 3/4" Bore, 12 Teeth, #35 Pitch UPC: 23899492954
Sprocket Clutch / 3/4" Bore, 12 Teeth, #35 Pitch Replaces Hoffco/Comet 209760 Fits Martin Wheel MT12-12RC35 Bore: 3/4, Chain Number: 35, One-piece sintered metal shoes, Keyway: 3/16 ", Non-directional clutch (inboard or outboard), Teeth: 12, 4" OD, For 2.5 thru 8 HP engines, Keyway: Built-in
|
|
ST-255-220
 
enlarge
$118.28
|
Sprocket Clutch, .750" Bore UPC: 23899517053
Sprocket Clutch / .750" Bore Replaces Hilliard LD4S-4L Fits Rotary 10390, NHC 283-4652 Bore: 3/4 ", Maximum 13 HP rating, Keyway: Built-in 3/16", Includes retaining ring, Teeth: 10, Height: 2 9/32", OD: 4 3/16", Thermodynamic design absorbs heat without damaging springs, Chain Number: 40/41, High performance
|
|
ST-255-224
 
enlarge
$114.54
|
Sprocket Clutch, .750" Bore UPC: 187923000000
Sprocket Clutch / .750" Bore Replaces Hilliard LD4-S-5L Fits Rotary 10389, NHC 283-4568 Keyway: Grooved; built-in 3/16", Height: 2 9/32 ", Maximum 13 HP rating, Chain Number: 35, Bore: 3/4 ", OD: 4 3/16 ", Thermodynamic design absorbs heat without damaging springs, High performance, Teeth: 12, Includes retaining ring and set screw
|
|
ST-255-257
 
enlarge
$567.03
|
Torque Converter, Comet 218353A UPC: 23899487127
Torque Converter / Comet 218353A Replaces Hoffco/Comet 215404, Hoffco/Comet 217784A, Hoffco/Comet 218353A Fits Prime Line 7-06021, Napa 7-06021, Rotary 13988 Teeth: 10, Fits most 3 thru 6 HP (horizontal shaft) engines, including Briggs & Stratton, Clinton, Kohler and Tecumseh, Series 30, Complete kit includes belt, snap-on cover, mounting sprocket with built-in jackshaft and sprocket, plus all the mounting hardware, Can special order plastic shroud only, Shaft Size: 3/4 ", Chain Number: #40/41 chain
|
|
ST-756-086
 
enlarge
$12.70
|
Side Marker Light UPC: 23899297726
Side Marker Light / Fits JThomas TP30 2 1/8" W x 2 3/4" L with 1" projection, Additional wire port available for separate ground wire mount on non-metallic surfaces, Single wire for electrical connection, Stud-mount light functions as side marker or clearance light with built-in reflective optics, Amber lens, Submersible
|
|
BUNTON/BOBCAT/RYAN
|
TEX-887879
Discontinued Item
Look HERE for
possible alternatives
|
Bunton / Ryan / Doosan / Bobcat / Ryan / Steiner Part number 887879
(DISC) CHARGER KIT BUILT-IN
|
|
ROTARY
|
RO-14894
 
enlarge
$11.30
|
Rotary Part number 14894
SAFETY GLASSES - S3370E UPC: 034761148947
|
|
Sprayers Plus
|
SP-KIT18FC
$37.59
|
Sprayers Plus Part KIT18FC/KIT 18FC
REPLACED BY K3028: SPRAY GUN WITH BUILT-IN FILTER
|
|
SP-K3026
$37.59
|
Sprayers Plus Part K3026
SPRAY GUN WITH BUILT-IN FILTER
|
|
SP-KIT18F
$32.57
|
Sprayers Plus Part KIT18F/KIT 18F
REPLACED BY K3001: SPRAY GUN WITH BUILT-IN FILTER
|
|
SP-KIT513
$37.59
|
Sprayers Plus Part KIT513/KIT 513
REPLACED BY K3026: SPRAY GUN WITH BUILT-IN FILTER
|
|
SP-K3001
$32.57
|
Sprayers Plus Part K3001
SPRAY GUN WITH BUILT-IN FILTER
|
|
SP-K3028
$37.59
|
Sprayers Plus Part K3028
SPRAY GUN WITH BUILT-IN FILTER
|
|
Stens
|
ST-700-220
 
enlarge
$763.21
|
Chain Grinder, Maxx UPC: 23899289707
Chain Grinder / Maxx Does not include 3/4" pitch adapter, 120 volt; 2.8 amps; 2950 RPM, Powerful motor and extremely easy-to-use controls, Cast aluminum base with built in light, Built for high volume chain sharpeners, Professional quality, Motor is non-reversing, MANUFACTURER'S WARRANTY APPLIES — to ensure tool accuracy and personal safety, do not attempt to repair tools under warranty, Includes three grinding wheels, 1/8, 3/16 and 1/4", instruction manual and wheel dressing brick, Exclusive built-in self-chain tightening as grinder is brought down
|
|
|
|
MSA_DIB-ENG25
Discontinued Item
Look HERE for
possible alternatives
|
DO IT BEST (coming) PART ENG25
FEATURES 2-INCH WALLS WITH POLYURETHANE INSULATION AND PLASTIC INTERIOR SILICONE GASKET RE-ENFORCED LID BUILT-IN HAND GRIPS AND ROPE HANDLES AND PITCHED TO ALLOW WATER TO SELF-DRAIN COMPLETELY.
|
|
MSA_DIB-ENG80
Discontinued Item
Look HERE for
possible alternatives
|
DO IT BEST (coming) PART ENG80
THE ENGEL DEEP BLUE COOLER FEATURES 2-INCH WALLS WITH POLYURETHANE INSULATION AND PLASTIC INTERIOR SILICONE GASKET RE-ENFORCED LID BUILT-IN HAND GRIPS AND ROPE HANDLES AND PITCHED TO ALLOW WATER TO SELF-DRAIN COMPLETELY. DIVIDER SLOTS FOR OPTIONAL PLASTIC DIVIDERS TO SEPARATE ITEMS. DIMENSIONS: 33.75L X 16.375W X 17.50H INCHES
|
|
General Electric
|
MDA_GEN-WD35X10351
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part WD35X10351
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! *NLA DISHWASHER BUILT-IN wt=5
|
|
MDA_GEN-JX9152EJES
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX9152EJES
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! MRO 27 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX9152ELDS
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX9152ELDS
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! MRO 27 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX9153DJWW
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX9153DJWW
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! MRO 30 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX827EFES
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX827EFES
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! 27 MICROWAVE BUILT-IN
|
|
MDA_GEN-JX827SFSS
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX827SFSS
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! OPTIONAL 27 BUILT-IN TRIM
|
|
MDA_GEN-JX9152DJWW
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX9152DJWW
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! MICROWAVE 27 BUILT-IN
|
|
MDA_GEN-JX7230ELES
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7230ELES
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! 30BUILT-IN TRIM KIT
|
|
MDA_GEN-JX7230SLSS
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7230SLSS
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! 30 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX7G
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7G
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! *NLA BUILT-IN K
|
|
MDA_GEN-JX7230BLTS
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7230BLTS
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! 30 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX7227SLSS
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7227SLSS
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! 27 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX7227ELES
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7227ELES
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! 27 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX7227DLWW
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7227DLWW
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! 27 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX7227DLBB
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7227DLBB
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! 27 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX7227DFWW
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7227DFWW
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! REPLACED BY: JX7227DLWW 27 BUILT-IN TRIM KIT
|
|
MDA_GEN-JX7227DFBB
Discontinued Item
Look HERE for
possible alternatives
|
General Electric Part JX7227DFBB
THIS IS A SPECIAL ORDER ITEM. THESE CAN TAKE MUCH LONGER TO ARRIVE! REPLACED BY: JX7227DLBB 27 BUILT-IN TRIM KIT
|
|
